Do you know what principles should be followed in fluent shelf design( Design specification for hea

We all know the fluent shelf, but we may not know much about the specific design specifications. Today, Henan storage shelf factory across the world is to tell you what principles should be followed in the fluent shelf design (heavy shelf design specifications).

  1. The slope length shall be moderate.
The design of the total depth of the fluent shelf should not be too large, otherwise there will be a large unusable upper "dead corner", which will affect the space utilization. In addition, the ramp is too long, the sliding controllability is poor, and the sliding impact is large, which is easy to cause the sliding not smooth and blocked, and the pallet goods are easy to overturn.
2. The ramp size is reasonable.
After the slide is installed on the fluency shelf, there must be a certain slope so that the tray can slide under heavy load. However, the chute should also be properly designed, because the slope is too small, and the tray may not slide or fall smoothly. On the contrary, if the slope is too large, the tray may slide too fast, resulting in collision or rollover. Therefore, in the actual design of heavy shelf, the selection of slope can be determined by detailed calculation and experiment.
3. Add damping device.
In order to make the slide smooth, if the slope is long, in order to avoid rollover caused by excessive impact when the pallet goods slide to the bottom, it is necessary to install a buffer device or picking separation device at the lower outlet of the fluent shelf ramp, which is difficult to design, manufacture and install and has high cost.
4. Fluency shelves should not be too high.
No matter what type of shelf, reliability and operability are important. Generally speaking, the height of fluent shelf is generally designed to be 6m, and the weight of single supported goods is generally less than 1000kg. If the height is too high and a single cargo is too heavy, its reliability and operability will be greatly reduced.